2023 Hiniker Agricultural 5600 Series 5630HL

2023 Hiniker Agricultural 5600 Series 5630HL

Swipe to View More

  • Year 2023
  • Make Hiniker Agricultural
  • Model 5600 Series
2023 Hiniker Agricultural 5600 Series 5630HL

2023 Hiniker Agricultural 5600 Series 5630HL

2023 Hiniker Agricultural 5600 Series 5630HL

A more efficient way to harvest stalks

CUT FIELD TIME SHRED AND WINDROW IN ONE PASS

Hiniker is a flail windrower distributor in North America. A Hiniker 5600 Series Flail Windrower can substantially cut your field time by shredding and windrowing stalks in one 20 ft. pass. Both the 5610L 15-ft flail windrower and the 5620HLI flail windrower are farm equipment which use a full width end-delivery cross auger to build neat, uniform windrows ready for baling or stacking. The 5630HL 30-ft model uses dual cross augers with a center delivery to achieve the same effect.

PROVEN CROSS-AUGER DELIVERY SYSTEM

The Hiniker high-volume 17" diameter cross-auger system provides positive material flow for consistently well-formed windrows. Material is placed—rather than thrown—into the windrow, resulting in neat, easily baled windrows with less opportunity for bunching.

Features may include:

  • Shown with access covers open.
  • High-vacuum 3-inch cup knives ensure clean, thorough shredding. Rotors are factory spin balanced for smooth operation. 20 and 30-ft models are standard with hard surfaced knives.
  • Constant-velocity P.T.O shafts are standard equipment to reduce driveline vibration and knocking when turning. An overrunning clutch is also included, providing protection for both tractor and shredder.
  • All rotor and drive shaft bearings are 2-inch diameter self-aligning (23/16" & 27/16" on 30' sizes). Bearings are triple lip sealed and shielded. Rotor bearings are precision piloted for long term stability and life.
  • 235 hp rated Superior™ gearboxes provide long-life trouble-free performance.
UNIQUE AUGERING SYSTEM

Equipped with a unique augering system the 5600 Series Windrowers give you the potential to reduce harvesting trips across the field by 50%. For more information, call our farm equipment distributor headquarters today!

The Model 5630HL covers twelve, 30-inch rows and adds a new dimension to cornstalk residue windrowing. This piece of farm equipment provides 30 feet of cutting width and features center windrow delivery. Twin augers produce a nicely-formed, baler-friendly windrow. Heavy duty hard faced knives are standard equipment.

PTO

PTO Type Category 5 Plus Constant Velocity 1 3/8" or 1 3/4" w/Overrunning Clutch | PTO: 3-Point: Category 5 Plus 1 3/8" or 1 3/4" w/Overrunning Clutch

Drivetrain

Gearbox 235 HP Rated

Wheels & Tires

Wheels (Field Operation):Four 15 x 10
Tires, Rear Specification Recommended Tire Size : 9.5L x 15 8-Ply Rib | 11L x 15-12PR (Included in Base)

Chassis

Hitch/Type Pull-Type or 2-Point Semi Mount | Pull-Type or 3-Pt.

Dimensions

Width, Working Position 30 FT.
Overall Width 380"
Dimensions Knives: 1/4" x 3" Hard-Faced High-Vacuum Cup | Rotor Bearings: 2 3/16" & 2 7/16" Piloted
Auger Diameter Cross: (2) 17" O.D. x 20" Pitch (Center Delivery)

Weights

Weight Approximate (with Tires): 10,490 lbs.

Features

Features Rotor Drive Belts: 4-Groove Banded| Hydraulic Cylinders and Hoses (Field Operation): Four Cylinder Phased System
Belt Type Idler: Spring-Loaded Backwrap
Knife Quantity 144
Rotor Quantity 2

Product Photography