Advanced Rental and Service Tractor Supply F&H

Information

2024 Fransgard Spreader Roller FSK-1000GA

Fransgård's self-loading spreaders with roller feeders are robust, reliable and with many appealing details. The models are produced in many sizes and therefore you can find a model that exactly fits your need for spreading coarse sand, sand/salt, fine gravel or similar material.

Each model in the series is also available in a galvanised version (GA). Galvanisation extends the lifetime considerably, especially when salt is used.

The spreader box is made of high strength steel (Domex 420) with wear steel on the top and bottom. Each model is fitted with a hydraulic engine with a powerful chain drive for operating the roller fitted with spiral-shaped knobs and an agitator that ensures uniform spreading of the desired spreading material. The roller also has a stone remover and empties quickly. New stone release system with finger springs ensures that larger stones are easily removed while only minimal additional spreading material is released.

With the many different types of suspensions for the spreader. With this feature you can reduce the amount of spreading material consumed and save money.

The machine can rotate in the suspension and is fitted with a transport lock.

The reinforcement at the bottom of the box is outward facing, so that the working width of the machine is not compromised.

The support leg is easily lifted and secured in the holder during work, so you always have the support leg with you when you need to park the leveller again.

The many 3-part stainless steel leaf springs provide uniform pressure on the rubber screen, ensuring optimum spreading of the material. The many springs are mounted individually and act as stone remover devices, allowing larger stones or lumps to escape without losing large amounts of material.

The heavy-duty profile from which the spring boom is made is Aqua Coated and fitted with stainless springs to ensure a long life in the harsh environment in which you work.

The front plate is reinforced by the top being bent around and welded together with 4 flat bars, which stand on end and are used to mount the desired suspension.

The box of the FSK spreaders is reinforced all around with an extra steel edge both at the top and bottom.