2024 Fransgard Mechanical Leveller GT-300AUS-RIP

2024 Fransgard Mechanical Leveller GT-300AUS-RIP

Fransgård's RIP models are constructed in the factory with particularly powerful rippers. The extra-large rippers are suitable for particularly hard-packed road material, where you want to be able to get more loose material to level the road. The towed model has the same unique and proven construction as the GT-DKH version.

The construction provides a very smooth working process and good possibilities to make a slope on the road so that rainwater always runs away from the road.

The rippers can be tilted up and fastened, allowing the machine to operate as a standard model when the surface is loose enough.

Therefore, an RIP model is more flexible than a standard model. The rippers can be ordered for the GT-DK, GT-DKH and GT-AUS models. They cannot be retrofitted and must therefore be ordered as an RIP model when placing the order.

The GT-300AUS-RIP sets new standards for professional levellers with its long distance of 5.4 m between the eye hook and the large rear wheels.

The machine can rotate in the suspension and is fitted with a transport lock.

The particularly powerful rippers loosen very hard-packed material, providing more loose material to level the road. The rippers can be tilted up and fastened to operate like a standard GT-DKH model if the road material is loose enough. (Photo shows a ripper mounted on a GT-DKH-RIP with the same principle

The leveller is prepared for the installation of hydraulic offset adjustment item no. 2528

Strong blade with reinforcements both at the top and at the back of the blade. The lower reinforcement at the rear is designed so that you can reverse with the leveller without turning the blade, and you will be able to reverse over any excess material that the leveller will press and distribute into the road, for example, when you come to an asphalt road.

As standard, the wheel suspension has a hydraulic cylinder for adjusting the horizontal cutting angle. You can set it up to 20 degrees both to the right and left side.

The bolts in the wheel set, which are greasable and have brass bushings, ensure a long service life and minimal maintenance costs.

Reinforced ends on the blade of the leveller, which are also prepared for mounting the side flap.