2024 Fransgard Mechanical Leveller GT-250HY

2024 Fransgard Mechanical Leveller GT-250HY

Fransgård's hydraulic (HY) levellers are used for efficient levelling of soil, clearing of snow and smoothing of roads.

The leveller has been developed and designed according to know-how accumulated over many years of experience with mechanical levellers. The quality is high as the leveller is Made in Denmark at our own factory in Farsø.

The powerful hydraulic cylinder is well protected on top of the boom and ensures easy blade travel of up to 244°. The machine has mechanical offset adjustment of 55 cm to the right or left without using tools.

The blade is prepared for the installation of wide support wheels that can be offset to create a sloping road surface, thereby diverting rainwater away. Side plates can be fitted on the right and left sides to hold the material, and a snow blade can be fitted on the right side to cut the edge diagonally so that the snow does not fall out behind the blade after driving.

The machine can rotate in the suspension and is fitted with a transport lock.

Strong blade with reinforcements at the rear. The lower reinforcement at the rear is designed so that you can reverse the leveller without turning the blade and you will be able to reverse over any excess material, for example, when you come to an asphalt road and the leveller will press and distribute the material out into the road.

The lift arms can be mounted in 2 different heights to fit most tractors. If the lifting arms are mounted in the lower hole on one side and the upper hole on the other side, the blade will have a horizontal cutting angle of approximately 7 degrees. The top bar attachment has both a fixed hole and an elongated slot, where the top bar bolt can usefully be mounted for, e.g., levelling roads. The blade will better follow the terrain and improve the end result.

A strong blade cylinder with 45 mm stick ensures that the blade is kept stable.

All GT-HY levellers are prepared for the installation of hydraulic offset adjustment (item no. 2528).

Reinforced ends on the blade of the leveller, which are also prepared for mounting the side flap and snow blade. Reversible wear steel bolts on with 16mm steel bolts grade 12.9.

The leveller is prepared for the installation of wheel sets item no. 2512 or 2513.