2024 Fransgard Mechanical Leveller GT-250

2024 Fransgard Mechanical Leveller GT-250

Fransgård's GT-210 and GT-250 mechanical levellers are built to a high quality in our own factory in Denmark.

Its high level of functionality makes it suitable for levelling soil, clearing snow and smoothing roads.

The leveller is adjustable 360° in 10 positions. It can be mechanically offset adjusted 55 cm to the right or left side. The adjustment is done without using tools. The blade is prepared for mounting wide support wheels that can be offset to provide a good slope on the road and thus direct rainwater away from the road.

Side plates can be fitted - on both the right and left sides - to hold the material, and a snow blade on the right side to cut the edge diagonally so snow doesn't fall out behind the blade after driving. All features that give a better result.

The machine can rotate in the suspension and is fitted with a transport lock.

Strong blade with reinforcements at the rear. The lower rear reinforcement is designed to allow the leveller to be reversed without turning the blade. This allows you to reverse over any excess material, for example, when you come to an asphalt road, and the leveller will press and distribute the material out into the road.

With the 3-point suspension on Fransgård's leveller, the lift arms can be mounted at 2 different heights to fit most tractors. If the lifting arms are mounted in the lower hole on one side and the upper hole on the other side, the blade will have a horizontal cutting angle of approximately 7 degrees.

Reinforced ends on the blade of the leveller, which are also prepared for mounting the side flap and snow blade.

The leveller is prepared for the installation of wheel sets item no. 2512 or 2513

Support legs are easily placed in the holder, so you always have them with you when you need to park the leveller.

The leveller can be mechanically offset adjusted to the right or left side.