2024 Fransgard Chain Mower FKR-1501

2024 Fransgard Chain Mower FKR-1501

Fransgård's new chain mower has been developed as a robust construction with many unique details that provide high flexibility and allow it to work efficiently in various demanding environments.

The mulcher can work in many different materials - everything from heavy grass to very dense shrubbery and smaller self-planted trees along forest roads. It can also be used for cutting hedges and branches hanging over roads.

The machine works up to 4.55 m from the centre of the tractor and can operate in a vertical position from 0-4 m in height and 35° downwards, where the flexible head allows you to work on both sides of a ditch from the same position (see the working area chart). The machine has an offset adjustment of 1.5 m.

The hydraulic cylinder for the mowing head can advantageously be in the floating position during work, as the machine then follows the ground perfectly. The machine is driven via a PTO axle and 2 powerful 3-track powerbelts with a double tightening function on the long belt. The drive line combined with PTO drive and 3-track powerbelt provides optimal operation and ensures minimal wear on the machine - even in the harshest environments.

The transport width is 2.5 m and the machine requires a tractor with a weight of 5 tonnes. Collision protection is standard equipment.

The machine can rotate in the suspension and is fitted with a transport lock.

The frame of the 3-point suspension is rolled into a hollow profile, which provides a very high strength to withstand the high loads during work with the machine.

Working area chart for FKR-150.

Working area chart for FKR-150.

The chain head is mounted with a steel hub on the gearbox axle. The axle is well protected by the leg of the cast steel gearbox.

The gearbox is mounted on a reinforced mounting plate, which is fitted with a raised vent as standard.

A durable 3-piece rubber cover mounted on the rear helps hold the material in place.