Since its introduction in Sweden in 2003, Fransgård's popular swath wilters have been continuously developed and adapted to the needs of customers, while more and more markets have become aware of the machine and its qualities, which has made Fransgård the market leader in this machine.
The swath wilter is available in 2 models, one of which is with hydraulic side lift. Both models can be used to great advantage in grass, hay or straw and leave a high airy swath without impurities such as soil and stones.
In short: BETTER CROP QUALITY
Efficient swath wilter with multiple optionsSwath wilter SV-2500SE/SV-2500SE-CD has a powerful rotor with 6 rows of springs and equal spacing around the shield, giving a uniform flow.
SV-2500SE/SV-2500SE-CD has the same basic design as SV-2500, but with swivel 3-point and fixed wheels. With the side lift you can move the swath to the side and set it in 3 positions. The best result is achieved when the material hits the middle of the lift.
Features may include:
Bracket wheel lightThe wheels can be removed on both sides and mounted in the bracket at the front of the machine during transport. This operation allows a transport width of 3.0 metres. The machine also comes standard with a galvanised bracket for mounting reflectors and lights.
Bracket wheel lightThe position bar at the rear of the side lift is ready for mounting reflectors and lights as standard.
Bolt 3-pointThe main bolt of the 3-point suspension is galvanised and greasable, which ensures a long service life.
CylinderThe machine is fitted with 2 parallel controlled hydraulic cylinders to raise and lower the side lift with
Drive shaft35 mm drive shaft between the gearbox and brake wheel ensures optimal operation of the machine.
Flange bearingA cast flange bearing at each end of the rotor can be easily greased from the outside.