2024 Fransgard Winch HW-3019

2024 Fransgard Winch HW-3019

The HW-3019 is a hydraulically driven winch that can be mounted and operated from many different machines that do not have a power take-off, such as a Unimog and Bobcat. The winch can be mounted both front and rear, which increases flexibility.

It is suitable for companies that regularly need to move trees quickly, for example, in the event of forest fall after a storm, to ensure road access, or simply for light forest maintenance.

The HW-3019 has a tractive force of 3 tonnes. It is fitted with both cast iron top and bottom rollers and double ball bearings. Belt brake is standard and the winch is operated via cable control or radio control.

The winch can be mounted with 3-point suspension or other types of suspension depending on the machine it is to be mounted on. It comes without hoses for the hydraulic motor, as these are supplied and individually adapted to the machine in question by the local workshop

The machine can rotate in the suspension and is fitted with a transport lock.

The moulded top roller box rests on a support plate, which ensures stable wire retraction, even under heavy loads. The support plate can be greased so that the top roller turns freely from side to side.

4 metre long battery cable with 80 Amp fuse. Mounted directly on the tractor battery.

The extra reinforced drive chain ensures long life and minimal wear on the chain wheels, as well as fewer breakdowns. The chain is lightly lubricated from the outside with chain spray or grease. It is important not to use oil, as it will run down the clutch lining, which is riveted to the large gear wheel.

The wire drum is fitted with a spring-loaded freewheel brake, which ensures that the wire drum stops rotating as soon as the extraction of the wire is stopped. This avoids loose wire inside the wire drum.

The winch has an electric-hydraulic control system with its own oil supply for operating the brake and clutch cylinders. It only requires 12V power from the tractor.

The winch is driven by the powerful oil engine, which requires 40-60 l/min. It is well protected inside the frame of the machine. The winch comes without hydraulic hoses for the oil engine, which are individually adapted to each machine.